• Generator Controller Automatic Start Module DSE701AS for DeepSea

    Generator Controller Automatic Start Module DSE701AS for DeepSea for sale at FridayParts, Buy aftermarket parts For OTHER BRAND excavators, wheel loaders, bulldozer, backhoe, skid steer loader and so on.

    US$75.59
    Availability: In stock
    SKU
    ELHW00515003
    Please enter a valid number in this field.
      product page

      Generator Controller Automatic Start Module DSE701AS for DeepSea

      Model No.: DSE701AS
      The DSE701AS is available in Automatic Start versions, offering an excellent range of engine monitoring and protection features.The module has been designed tomonitor low oil pressure, high engine temperature, over speed and a user defined auxiliary input.It also has the capability tomonitor battery charging by utilising theWL terminal on the charge alternator .When themodule detects a fault condition it automatically shuts down the engine.The DSE701 module includes a remote start signal input. This input allows the module to be started from a pre-defined remote location
           
      Features:
      Automatic start
      Engine pre-heat
      Engine monitoring and protection features
      Protected solid state (PSS) outputs
      Front panel mounting
      Tamper proof engine hours counter
      Remote start
      LED indicators

      Benefits:
      Hours counter provides accurate information for monitoring maintenance and warranty periods
      Multiple engine parameters are monitored simultaneously
           
      Automatic Mode:
      The key needs to be permanently left in the position
      The module is powered up by the remote start signal
      The pre-heat function is automatically carried out and then the engine is started
      To stop the engine the remote switch is turned to the ‘off’ position

      Overspeed Protection:
      The engine over speed trip setting can be calibrated at the rear of the module for 50Hz or 60Hz nominal operation (57Hz or 68Hz trip respectively).
      During engine cranking and for the first 10 seconds after the engine starts running, all alarm conditions are suspended (overspeed is enabled) to allow the engine to reach its optimum running speed