• Electronic Engine Speed Controller Governor ESD5500E Generator Genset

    Rating:
    100 % of 100

    Electronic Engine Speed Controller Governor ESD5500E Generator Genset for sale at FridayParts, Buy aftermarket parts For OTHER BRAND excavators, wheel loaders, bulldozer, backhoe, skid steer loader and so on.

    US$41.20
    Availability: In stock
    SKU
    HW00545006WIN
    Please enter a valid number in this field.
      product page

      Electronic Engine Speed Controller Governor ESD5500E Generator Genset

      Application:
      Technical Specification:
      Isochronous Operation/Steady State Stability ± 0.25% or better
      Speed Range/Governor 1K-7.5K Hz continuous
      Speed Drift with Temperature ± 1% Maximun
      IDLE Adjustment 160±20Hz - 60% of set speed
      Droop adjustment Min.(K-L Jumpered) 15Hz. ±6Hz. per 1.0 A change
      Droop adjustment Max.(K-L Jumpered) 400Hz. ±75Hz. per 1.0 A change
      Droop Adj. Max. (K-L Jumpered) 875Hz., ±75Hz. per 1.0 A change
      Droop Adj. Min. (K-L Jumpered) 15Hz.,±6Hz. per 1.0 A change
      Speed Trim Range±200Hz
      Remote Variable Speed Range 500 -7.5Hz. or any part thereof
      Terminal Sensitivity
      J: 100Hz., ±15Hz/Volt @ 5.0 K Impedance
      L: 735Hz., ± 60Hz/Volt @ 65 K Impedance
      N: 148Hz., ±10Hz/Volt @ 1Meg. Impedance
      P: 10V DC Supply @ 20ma Max.
      Speed Switch Adjustment Range 1000-10000Hz.

      Environmental:Ambient Operating Temperature Range -40℃ to +85℃
      Relative Humidity up to 95%
      Storage Temperature -55℃- 90℃
      Shock 20-100HZ 500mm/Sec

      Input power:Supply 12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected)
      Polarity Negative Ground(Case Isolated)
      Power Consumption 50mA continuous plus actuator current
      Actuator Current Range @ 25℃-(Inductive Load) Min. 2.5 Amps, Max. 10 Amps continuous
      Speed Sensor Signal 0.5-120 V RMS
      Speed Switch Relay Contacts(N.O.and N.C.) 10Amp

      Part Number:
      ESD5500E