When referring to CASE CX90, it could be a tractor or an excavator. The CASE CX90 excavator is a compact excavator especially designed for working in confined spaces or urban construction environments. Meanwhile, the CASE CX90 tractor, one of the popular members of the CASE IH (International Harvester) series, is a high-performance tractor designed to meet agricultural needs and is suitable for a variety of farmland operations.
For many farmers using CASE CX90 tractors, water pump replacement is often an unavoidable maintenance task. As a core component of the tractor’s cooling system, once a water pump fails, it will not only cause engine overheating but may also cause more serious mechanical damage, thus affecting the progress and efficiency of farming operations. However, for many farmers, replacing a water pump is not an easy task. Major challenges include complicated disassembly processes, difficulty in obtaining accessories, and lack of professional technical guidance.
CASE CX90 Tractor Water Pump Replacement Guide
In this blog, we will provide you with a detailed step-by-step guide to help you solve the problem. As the fall harvest season approaches, I believe this guide will help you maximize your tractor’s efficiency. Let’s take a look!
If you are not sure whether your water pump needs a replacement, welcome to check the blog. Must-Known Signs of Bad Water Pump
Tools You Need
- 17mm wrench
- Screwdrivers
- Channel locks
- Torque wrench
- A Quality Replacement Water Pump
Prepare the Tractor
- Park the Case CX90 in a safe, flat area.
- Ensure the engine is off and cool to prevent burns or injury.
- Disconnect the battery to avoid electrical accidents.
Remove the Old Water Pump
- Locate the water pump on the engine.
- Loosen the belt tensioner with a 17mm wrench and remove the belt that connects to the water pump.
- Use screwdrivers and channel locks to remove the hoses attached to the water pump. Be cautious, as rust or old coolant may spill out.
- Unbolt the old water pump and carefully remove it from the engine.
Install the New Water Pump
- Take the new water pump (part number 311781A1).
- Compare it with the old pump to ensure it’s the correct size and type.
- Place the new pump into position and bolt it in place.
- Reconnect the hoses securely.
- Replace the belt and adjust it to the correct tension.
- Check and Finish
- Ensure all connections are tight and properly aligned.
- Top off the coolant if needed.
- Reconnect the battery.
- Start the tractor and check for leaks or unusual noises. Let it run for a few minutes to ensure the new pump is functioning correctly.
Final Checks
- After installation, monitor the engine temperature and ensure that the coolant is circulating properly.
- If all is well, your Case CX90 is ready for work again!
CASE CX90 Water Pump Replacement Video
The above replacement guide refers to Mikep’s video. FridayParts is excited to partner with Mikep, a YouTuber, to help demonstrate the complex task of replacing a water pump more intuitively! Welcome to check the video below. You can also switch to YouTube to check Mike’s channel: Mikep7810.
The replacement water pump that appears in the video is sponsored by FridayParts. You can directly feel the craftsmanship and quality of the water pump. We are an online shop dedicated to providing our customers with OEM quality aftermarket tractor parts. You can also enjoy fast shipping and cost-effective solutions! For more information and products, feel free to reach out to FridayParts.com.
