Hydraulic Motor Replaces 109-1220-006 109-1270-00 | Fits Danfoss 4000 Series

Hydraulic Motor Replaces 109-1220-006 109-1270-00 | Fits Danfoss 4000 Series

Replacement Part Number: 109-1220-006, 109-1270-006, 1091220006, 1091270006

Specification:
Actual Mounting Flange: 4-Bolt Flange - Sae C - With 5 In. Pilot Dia.
Actual Output Shaft: Spline
Actual Port Type: 1.0625-12 UN-2B SAE O-Ring Ports - Staggered Ports
Continuous Flow Rate: 95 L/min
Continuous Torque: 7523 in
Maximum RPM: 303 rpm
Displacement: 19.03 in³/r
Drain Connection Size: .4375-20 Unf-2b O-ring Port Size -4 With Check Valve
Intermittent Pressure: 260 bar
Max Continuous Oil Viscosity: 70 Saybold universal second
Maximum Flow Rate: 25 gpm
Maximum Operating Temperature: 180 °F
Maximum Operating Pressure: 3000 psi
Max Operating Temperature: 180 °F
Max Rpm: 303 rpm
Maximum RPM-Continuous: 239 rpm
Max System Operating Temperature: -34°C to 82 °C
Motor Port Size: 1-1/16–12 UNF-2B
Motor Port Type: Straight Thread O-Ring SAE
Mounting Type: 4-Bolt Flange - 5 in Pilot - SAE C
Replacement Balance Ring - Sold Separately: 006 Design -21316-000 1 Required
Replacement Buna Seal Kit - Sold Separately: 006 Design - Rear Seal Kit 61234-000, 006 Design - Shaft Seal Kit 61281-000 - 1 Required Each
Operation Rating Description: Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every Minute / Peak Operation - 1 Percent Of Every Minute
Operation Mode: Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every Minute / Peak Operation - 1 Percent Of Every Minute
Output Shaft Size: 1-1/4 in 14T Spline

Applications:
Fit for Excavator, Loader, Tractor, Dozer, Combine, Cranewith Danfoss 4000 Series