Aftermarket DSE Deep Sea Electronics DSE9480 12 Volt 10 Amp MKII Intelligent Battery Charger

Aftermarket DSE Deep Sea Electronics DSE9480 12 Volt 10 Amp MKII Intelligent Battery Charger

DSE9480 MKII 12 volt 10 amp Intelligent Battery Charger. The DSE9480 MKII is an intelligent switch-mode battery charger DSE9480 MKII 12 volt 10 amp Intelligent Battery Charger NOW SUPPORTS LI-ION CHARGING PROFILE The DSE9480 MKII is an intelligent switch-mode battery charger that can be programmed for different charging curves. This helps to maximise battery life. The charger is programmed using the DSE Configuration Suite Software. The charger can be DIN rail or chassis mounted and has three built-in LEDs to indicate current charging status and fault conditions. The charger continues to operate during cranking and running and accepts multiple AC voltage connections. hat can be programmed for different charging curves. This helps to maximise battery life. The charger is programmed using the DSE Configuration Suite Software. The charger can be DIN rail or Chassis mounted and has three built-in LEDs to indicate current charging status and fault conditions. The charger continues to operate during cranking and running and accepts multiple AC voltage connections.

PRODUCT VARIANTS
9480-01 - 12 volt 10 amp Intelligent Battery Charger
VOLTAGE RANGE
90 V to 305 V (L-N)
FREQUENCY RANGE
48 Hz to 64 Hz (L-N)
DC OUTPUT
10 A DC at 12 V DC
RIPPLE AND NOISE
<1%
EFFICIENCY
>86%
REGULATION
LINE
<0.5%
LOAD
2%
TEMPERATURE SENSOR INPUT
PT1000
PROTECTIONS
Short Circuit
DC Over Voltage
DC Over Current
Reverse Polarity
Over Temperature
AC Under & Over Voltage
CHARGE FAILURE RELAY
3 A at 30 V DC volt free relay