12V Rule 25SA 600GPH 750GPH Automatic Marine Bilge Pump Submersible with 3/4" Hose Connection 25S

12V Rule 25SA 600GPH 750GPH Automatic Marine Bilge Pump Submersible with 3/4" Hose Connection 25S

Product Description:
New Rule 600GPH 750GPH automatic submersible bilge pump. Part number 25SA. Replaces the discontinued Rule 25S bilge pump. Has a new anti-airlock design with backflow prevention and threaded discharge for multiple port options. Has the same base footprint as the 25S.

Specification:
For fresh water and salt water use only
Runs on 12V DC power
Draws up to 1.6 amps at max flow
Requires 4A fuse (not included)
Discharge port is 3/4″ hose or 3/4″ NPSM
Dimensions are 4.2″ (107mm) high x 2.9″ (74mm) width x 2.5″ (64mm) depth (not including discharge port)

Feature:
Automatic electronic sensing – No float switch needed!
Checks for water every 2.5 minutes by running for a half second
Consumes 0.2 amps per day
Keeps more water out of the bilge than a similar float switch setup
Connect black wire to negative and brown wire to positive – brown/white wire is manual override (use with Rule 41 or 43 switch for toggle ability)
Ignition protected
High-efficiency, low amp motor
Non burn-out when dry
Stainless steel shaft
Includes back flow preventer
ISO 8849 and ISO 8846 marine certifications
Easy clean snap lock strainer